EasyManuals Logo

Epson EB-E10 User Manual

Epson EB-E10
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #207 background imageLoading...
Page #207 background image
Glossary
207
Refresh Rate The light-emitting element of a display maintains the same
luminosity and color for an extremely short time.
Because of this, the image must be scanned many times per
second to refresh the light-emitting element.
The number of refresh operations per second is called the
Refresh rate and is expressed in hertz (Hz).
SDTV An abbreviation for Standard Definition Television that refers
to standard television systems which do not satisfy the
conditions for HDTV High-Definition Television.
SNMP An abbreviation for Simple Network Management Protocol,
which is the protocol for monitoring and controlling devices
such as routers and computers connected to a TCP/IP network.
sRGB An international standard for color intervals that was
formulated so that colors that are reproduced by video
equipment can be handled easily by computer operating
systems (OS) and the Internet. If the connected source has an
sRGB mode, set both the projector and the connected signal
source to sRGB.
SSID SSID is identification data for connecting to another device on
a wireless LAN. Wireless communication is possible between
devices with the same SSID.
Subnet Mask This is a numerical value that defines the number of bits used
for the network address on a divided network (subnet) from the
IP address.
SVGA A screen size standard with a resolution of 800 (horizontal) ×
600 (vertical) dots.
SXGA A screen size standard with a resolution of 1,280 (horizontal) ×
1,024 (vertical) dots.
Sync. The signals output from computers have a specific frequency.
If the projector frequency does not match this frequency, the
resulting images are not of a good quality.
The process of matching the phases of these signals (the relative
position of the crests and the troughs in the signal) is called
Synchronization.
If the signals are not synchronized, flickering, blurriness, and
horizontal interference occur.
Tracking The signals output from computers have a specific frequency.
If the projector frequency does not match this frequency, the
resulting images are not of a good quality.
The process of matching the frequency of these signals (the
number of crests in the signal) is called Tracking.
If Tracking is not carried out correctly, wide vertical stripes
appear in the signal.
Trap IP Address This is the IP address for the destination computer used for
error notification in SNMP.
VGA A screen size standard with a resolution of 640 (horizontal) ×
480 (vertical) dots.
XGA A screen size standard with a resolution of 1,024 (horizontal) ×
768 (vertical) dots.
WXGA A screen size standard with a resolution of 1,280 (horizontal) ×
800 (vertical) dots.
WUXGA A screen size standard with a resolution of 1,920 (horizontal) ×
1,200 (vertical) dots.

Table of Contents

Other manuals for Epson EB-E10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-E10 and is the answer not in the manual?

Epson EB-E10 Specifications

General IconGeneral
Matrix size0.55 \
Number of colors1.07 billion colors
Native aspect ratio4:3
Projection distance0 - 1.76 m
Vertical scan range100 - 120 Hz
Projection technology3LCD
Contrast ratio (typical)15000:1
Screen size compatibility22 - 350 \
Projection distance (wide)0.87 - 10.34 m
Projector native resolutionXGA (1024x768)
Keystone correction, vertical-30 - 30 °
Projector brightness (economic mode)2200 ANSI lumens
Lamp typeUHE
Lamp power210 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source6000 h
Service life of light source (economic mode)12000 h
FocusManual
Throw ratio1.44 - 1.95:1
Fixed focal length16.7 mm
Full HDNo
Video processing10 bit
Video color modesBlackboard, Cinema, Dynamic, Presentation, sRGB
Analog signal format system-
AC (power) inYes
Composite video in0
HDMI connector typeFull-size
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)28 dB
RMS rated power2 W
PlacementCeiling, Desktop
Product typeStandard throw projector
Product colorWhite
Housing materialPlastic
Market positioningPresentation
Cable lock slot typeKensington
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)327 W
Power consumption (economy mode)225 W
Bundled softwareInhalt DIY-App, Epson Projektor Management, Epson Projektor Professional Tool
Pallet weight0 g
Quantity per pack1 pc(s)
Quantity per pallet84 pc(s)
Quantity per pallet (UK)126 pc(s)
Harmonized System (HS) code85286200
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
USB display function2 in 1: Image / Mouse
Weight and Dimensions IconWeight and Dimensions
Depth237 mm
Width302 mm
Height82 mm
Weight2400 g
Package depth376 mm
Package width327 mm
Package height152 mm
Package weight3716 g

Related product manuals