: Flashing : Lit : Off
Status Indicator on projec-
tor
Indicator on Wire-
less LAN unit
The Wireless LAN unit not
mounted or the Wireless LAN
Power setting on the Wireless LAN
menu is Off
The Wireless LAN unit mounted to
the projector but not connected to
the network
The Wireless LAN unit mounted to
the projector and connected to the
network
The Wireless LAN unit mounted to
the projector, connected to the
network, and communicating
Attaching and Removing the Cable Cover
Mounting the cable cover, disordered cables can be tidied away. (The
illustration shows a projector suspended from the ceiling.)
Attaching
Procedure
A
Bundle the cables with a commercially available band.
B
Insert the tabs on the cable cover into the two holes on the
back of the projector.
C
Tighten the two cable cover screws. (You can tighten the
screws with your fingers.)
Installing Optional and Supplied Accessories
144
To Next Page
Loading...
Need help?
General
