Notes on Transporting
There are many glass parts and precision components inside the projector.
To prevent damage due to impacts when transporting, handle the projector
as follows.
Caution
The projector should not be carried by one person. At least two people are
needed to unpack or carry the projector.
Attention
• Moving Nearby
- Turn off the power to the projector and disconnect all cables.
- Attach the cover to the lens.
• When Transporting
After checking the points in "Moving Nearby", prepare the following and then
pack up the projector.
- Remove the lens unit if an option lens is installed.
- If the projector does not have a lens, attach the cover that was on the
lens mount when you purchased the projector.
- Attach the lens if the projector has a built-in lens. Upon purchase,
attach the protective pad that is attached around the lens unit.
- Move the lens position to the home position.
s "Adjusting the Position of the Projected Image (Lens Shift)"
p.34
- Enclose the projector securely in packaging material to protect it from
shock, and place it into a strong container. Be sure to notify the carrier
company that it is precision equipment and that it needs to be kept
horizontally during transportation.
Safety Warning and Cautions
9
To Next Page
Loading...
Need help?
General
