Need help?Do you have a question about the Epson EB-L1505U and is the answer not in the manual?
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:10 |
| Projection distance | 1.99 - 27.77 m |
| Projection technology | 3LCD |
| Contrast ratio (typical) | 2500000:1 |
| Screen size compatibility | 60 - 500 \ |
| Projection distance (tele) | 3.3 - 27.8 m |
| Projection distance (wide) | 2 - 17.2 m |
| Projector native resolution | WUXGA (1920x1200) |
| Keystone correction, vertical | -45 - 45 ° |
| Keystone correction, horizontal | -30 - 30 ° |
| Built-in display | Yes |
| Display diagonal | 1.03 \ |
| Throw ratio | 1.57 - 2.56:1 |
| Focal length range | 36 - 57.35 mm |
| Vertical lens shift range | -60 - 60 % |
| Horizontal lens shift range | -18 - 18 % |
| Lamp power | 670 W |
| Light source type | Lamp |
| Service life of light source | 20000 h |
| Service life of light source (economic mode) | 30000 h |
| 3D | No |
| Video color modes | Cinema, Dynamic, Presentation, sRGB |
| Analog signal format system | - |
| Audio (L/R) in | 3 |
| Audio (L/R) out | 1 |
| Composite video in | 0 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Noise level | 37 dB |
| Country of origin | China |
| Noise level (economic mode) | 30 dB |
| Placement | Desktop |
| Product type | Large venue projector |
| Product color | Black |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 908 W |
| Power consumption (economy mode) | 597 W |
| Cables included | AC, VGA |
| Pallet width | 800 mm |
| Pallet height | 150 mm |
| Pallet length | 1200 mm |
| Pallet width (UK) | 1000 mm |
| Quantity per pack | 1 pc(s) |
| Quantity per pallet | 6 pc(s) |
| Harmonized System (HS) code | 85286200 |
Weight and Dimensions| Depth | 492 mm |
|---|---|
| Width | 586 mm |
| Height | 211 mm |
| Weight | 23800 g |
| Package depth | 780 mm |
| Package width | 750 mm |
| Package height | 325 mm |
| Package weight | 33900 g |
Provides warnings and cautions related to the safe installation of the projector.
Details the functions of each button on the projector's remote control for operation.
Details how to shift the lens to adjust the projected image position when direct front installation is not possible.
Guides users on how to adjust the focus of the projected image for clarity.
Explains how to correct image warping that may occur with certain lenses and focus settings.
Explains methods for connecting a computer to project images using various cable types and audio output.
Details methods for connecting various video image sources to the projector.
Explains how to automatically detect input signals and switch between them for projection.
Covers methods for correcting keystone distortion and other image shape issues.
Details how to correct distortion by adjusting each of the four corners of the projected image independently.
Guides users to select the optimum image quality by choosing appropriate color modes based on surroundings.
Explains how to set the brightness for the light source, affecting image quality and lifespan.
Explains how to change the aspect ratio of the projected image to match the signal type and screen.
Covers adjustments for hue, saturation, brightness, and gamma.
Explains how to adjust tint, vividness, and brightness for each color axis (R, G, B, C, M, Y).
Guides on adjusting halftone brightness differences based on the connected device, using correction values or graphs.
Details how to adjust image resolution using Image Enhancement for clearer images with texture.
Explains the function to project images at doubled resolution by diagonally shifting pixels for fine detail.
Explains how to set up multiple projectors for large, seamless images by adjusting brightness and color tone.
Details automatic adjustment of images from multiple projectors to match a master projector's settings.
Explains how to create one large image by combining images from multiple projectors, up to nine.
Guides on selecting projectors and automatically configuring images for tiling using Projector Grouping.
Describes how to fine-tune overlapping areas of projected images to create a seamless screen.
Details adjusting tint and brightness for multiple projectors, with auto adjustment options.
Guides on automatically correcting brightness and tint for selected projectors based on the master projector.
Explains how to fine-tune color balance and brightness from black to white for each color tone.
Explains how to simultaneously project images from two sources on the right and left sides of the screen.
Provides step-by-step instructions for projecting images in split screen mode.
Explains how to temporarily hide the image and sound to focus audience attention or during file changes.
Describes how to freeze a moving image to project it as a still photo or for operations without projecting images.
Explains how to expand images to view greater detail, such as graphs and tables, by zooming into parts.
Explains how to save, load, erase, and reset settings for image and geometry correction in memory.
Guides on scheduling projector operations like power on/off and source switching for automatic execution.
Explains how to limit projector usage by activating password protection for users.
Lists the four types of password protection available: Power On, User's Logo, Network, and Schedule.
Provides the procedure to set up password protection for the projector.
Describes three operation restriction functions: Control Panel Lock, Lens Lock, and Remote control button lock.
Offers solutions for common problems related to images, projection startup, and other issues.
Lists common image-related problems like no images, fuzzy images, or incorrect colors, with troubleshooting steps.
Provides checks and remedies for fuzzy, out-of-focus, or distorted images, including focus and distance.
Lists reasons why automatic adjustments might fail, such as temperature, lens mismatch, or surrounding brightness.
Covers problems encountered when the projector starts, specifically when it does not turn on.
Provides checks and remedies for when the projector fails to turn on, including power and indicator checks.
Provides troubleshooting steps for a non-functional remote control, such as pointing direction and receiver checks.
Details how to clean the air filter and air intake vent when prompted by specific messages or indicator lights.
Provides step-by-step instructions for replacing the projector's air filter when it is dirty or needs replacement.
Describes how to automatically adjust the color tone for the entire screen based on default settings to compensate for aging.
Shows the vertical and horizontal keystone adjustment ranges for different projector models and lenses.
Describes correcting distortion when projecting onto curved surfaces, adjusting expansion and contraction.
Details lens adjustment ranges for corner wall projection, including concave and convex corrections.
Provides general specifications for various projector models, including dimensions, resolution, and light source.
To Next Page
