AB
Illustration
90% 6,000 hours
80% 10,000 hours
70% 19,000 hours
60% 29,000 hours
50% 41,000 hours
40% 56,000 hours
30% 78,000 hours
a
• This is an approximate guide only and may change depending on
usage and surroundings.
• The times above are the target hours when using the projector
continuously without changing the Brightness Level or Constant
Brightness settings and are not guaranteed.
• When the usage time exceeds 20,000 hours, you may need to replace
parts inside the projector.
• When Constant Brightness is set to On, and the approximate
constant time has been exceeded, you may not be able to set a high
value for Brightness Level.
Setting the Amount of Light of the Projected
Image
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
a
Dynamic Contrast can only be set when the Color Mode is set to
Dynamic or Cinema.
a
Press the [Menu] button while projecting.
b
Select Dynamic Contrast from Image, and then press the [ ]
button.
c
Select Normal or High Speed, and then press the [ ] button.
The setting is stored for each color mode.
d
Press the [Menu] button to finish making settings.
Adjusting Projected Images
77
To Next Page
Loading...
Need help?
General
Weight and Dimensions
