Settings Menu
Submenu Function
Geometry Cor
rection
You can correct distortion.
s "Correcting Distortion in the Projected Image" p.62
• Off:
Temporarily cancels the geometry correction.
• H/V-Keystone:
Adjust V-Keystone, V-Balance, H-Keystone, and H-
Balance to correct vertical and horizontal keystone
distortion.
• Quick Corner:
Select and correct the four corners of the projected image.
• Curved Surface:
Corrects distortion that occurs when projecting on a
curved surface.
• Corner Wall:
Corrects distortion that occurs when projecting on a
surface with right angles.
• Point Correction:
Divides the projected image into a grid and corrects the
distortion by moving the selected point of intersection
from side to side and up and down.
• Memory:
You can save the adjustment value of the geometry
correction and load it when needed.
s "Memory Function" p.111
Split Screen
You can split the screen into two screens.
s "Projecting Two Images Simultaneously (Split Screen)"
p.104
Volume
You can adjust the volume. Setting values are saved for each
source.
List of Functions
131
To Next Page
Loading...
