Extended Menu
Submenu Function
Home Screen
Home Screen Auto Disp.: When set to On, the Home
screen is displayed when the projector turns on. The Home
screen is not displayed when the selected source has an
image signal when the projector turns on.
Custom Function 1, Custom Function 2: Select functions
to be assigned to the Home screen from the following five
functions. Network Settings, Info, Image Enhancement,
Frame Interpolation, Split Screen
Submenu Function
Display
You can make settings related to the projector's display.
Menu Position: Select the position to display the menu on
the projected screen.
Message Position: Select the position to display the message
on the projected screen.
Messages: When set to Off, the following items will not be
displayed.
Item names when the Source, Color Mode, or Aspect is
changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background
*
: You can set the screen background
to Black, Blue, or Logo when no image signal is available.
Startup Screen
*
: Set to On to display the User's Logo when
you turn on the projector.
Standby Confirmation: (This is unavailable when the
Remote Control Type is set to Simple.) If it is set to Off,
you can turn off the power simply by pressing the [t]
button once.
Air Filter Notice: You can set whether or not (On/Off) to
enable Air Filter Notice. When this is set to On and a clog
in the air filter is detected, the message is displayed on the
screen.
Screen: (This is unavailable when projecting images from a
computer over a network.) Set the aspect ratio and position
of the projected screen according to the screen being used.
s "Screen Settings" p.30
Panel Alignment: Correct color misalignments (red and
blue) in the screen.
s "Panel Alignment" p.189
Color Uniformity: Adjusts the color tone balance for the
whole screen.
s "Color Uniformity" p.191
OSD Rotation: Rotates the menu direction by 90 degrees.
List of Functions
133
To Next Page
Loading...
Need help?
General
Weight and Dimensions
