Projector Parts and Functions
14
Projector Parts - Remote Control
Name Function
A
Power button
[ ]
Turns the projector on or off.
B
[Computer] button Selects the Computer port as the image source.
C
[HDMI/Video]
button
Switches the image source between the HDMI and Video
ports.
D
Numeric buttons Enters numbers in the projector's menu while holding
down the [Num] button.
E
[Auto] button Optimizes Tracking, Sync., and Position in the projector's
Signal menu while projecting an analog RGB signal from
the Computer port.
F
[Aspect] button Changes the aspect mode.
G
[Num] button Hold down this button to enter numbers using the
numeric buttons.
H
[Menu] button Displays and closes the projector's menu.
I
Arrow buttons Selects menu items while displaying the projector's menu
or help.
J
[Enter] button [ ] Enters the current selection and moves to the next level
while displaying the projector's menu or help.
Acts as a mouse's left button when using the Wireless
Mouse function.
K
[User] button Performs settings assigned in the User Button setting in
the projector's Settings menu.
L
[Page] up/down
buttons
Controls page up and down on your computer when you
connect a projector and computer using a USB cable or
over a network.
Displays the previous or next screen while using the PC
Free feature.
M
[E-Zoom] +/–
buttons
Zooms in or zooms out the image area.
N
[A/V Mute] button Turns the video and audio on or off temporarily.
To Next Page
Loading...
Need help?
General
