a
You can set Color Mode from the Configuration menu.
s Image - Color Mode p.102
Setting Auto Iris
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
a
Press the [Menu] button.
s "Using the Configuration Menu" p.99
Using the remote control Using the control panel
b
Select Auto Iris from Image.
c
Select Normal or High Speed.
The setting is stored for each Color Mode.
a
When set to High Speed, the brightness of the image is
adjusted as soon as the scene changes.
d
Press the [Menu] button to finish making settings.
a
• Auto Iris can only be set when the Color Mode is Dynamic
or Theatre.
• When Auto Iris is set to Normal or High Speed, Light
Optimizer is enabled (this is also enabled when Light
Optimizer is set to Off and the Light Optimizer settings
cannot be changed).
Adjusting Projected Images
54
To Next Page
Loading...
Need help?
General
