Need help?Do you have a question about the Epson EB-W52 and is the answer not in the manual?
General| Matrix size | 0.59 \ |
|---|---|
| Matrix type | 3-panel (p-Si TFT active) |
| Native aspect ratio | 16:10 |
| Projection distance | 1.68 - 2.02 m |
| Projection technology | 3LCD |
| Contrast ratio (typical) | 16000:1 |
| Screen size compatibility | 30 - 320 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, horizontal | -30 - 30 ° |
| RMS rated power | 2 W |
| Focus | Manual |
| Throw ratio | 1.3 - 1.56 |
| Focal length range | 16.9 - 20.28 mm |
| Product type | Standard throw projector |
| Product color | Black, White |
| Market positioning | Home cinema |
| Cable lock slot type | Kensington |
| Lamp type | UHE |
| Lamp power | 210 W |
| Light source type | Lamp |
| Service life of light source | 6000 h |
| Service life of light source (economic mode) | 12000 h |
| Built-in display | No |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Power consumption (typical) | 327 W |
| Video color modes | Blackboard, Cinema, Dynamic, Presentation, sRGB |
| Analog signal format system | - |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Noise level | 37 dB |
| Noise level (economic mode) | 28 dB |
Weight and Dimensions| Depth | 237 mm |
|---|---|
| Width | 302 mm |
| Height | 92 mm |
| Weight | 2600 g |
Identifies and describes the front components of the projector.
Identifies and describes the rear components of the projector.
Provides guidance on selecting an optimal location for projector installation.
Explains how to connect various devices and sources to the projector.
Step-by-step guide on how to power on the projector correctly.
Procedures for safely powering down the projector after use.
Guide to displaying presentations directly from a USB device without a PC.
Information on setting up password protection and button locks.
How to connect and configure the projector for projection over a wired network.
Steps to set up wireless projection using a LAN module or built-in Wi-Fi.
How to project from mobile devices using Miracast technology.
How to access and control projector settings via a web browser.
Detailed settings for adjusting image quality parameters like brightness and contrast.
How to configure input signal properties like resolution and aspect ratio.
Advanced setup options for home screen, display, projection, and operation.
Settings for network configuration, including wireless and wired LAN.
General advice and warnings for maintaining the projector's condition.
How to clean and maintain the air filter and vents for proper ventilation.
Information about lamp life, replacement, and resetting the lamp timer.
General troubleshooting steps for projector operational issues.
Explains projector indicator lights and their meanings for troubleshooting.
Solutions for issues related to projected images or audio output.
Troubleshooting steps for projector and remote control operational issues.
Solutions for common issues encountered when using the projector on a network.
Detailed technical specifications of the projector models.
To Next Page
