EasyManuals Logo

Epson EB-W52 User Manual

Epson EB-W52
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
Projector Network Settings - Network Menu
144
Network Menu - Notifications Menu
Settings on the Notifications menu let you receive an email notification if a
problem or warning occurs in the projector.
s Network > Network Configuration > Notifications
Setting Options Description
Mail Notification On
Off
Set to On to send an email to the preset
addresses when a problem or warning
occurs with a projector.
SMTP Server IP address Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x,
192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255).
Port Number 0 to 65535 (default
is 25)
Select a number for the SMTP server
Port Number.
Setting Options Description
From Up to 32
alphanumeric
characters
Up to 64
alphanumeric
characters from the
Web browser
(do not use " ( ) , : ;
< > [ \ ] spaces)
Enter the email address of the sender.
Address 1 Setting
Address 2 Setting
Address 3 Setting
Enter the e-mail address, and select the
alerts you want to receive. Repeat for up
to three addresses.
SNMP On
Off
Set to On to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
Trap IP Address 1
Trap IP Address 2
IP address Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Community Name Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
Set the SNMP community name.
PJLink Notification On
Off
Enables or disables the PJLink
notification function.
Available only for models that support
wired LAN projection.

Table of Contents

Other manuals for Epson EB-W52

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-W52 and is the answer not in the manual?

Epson EB-W52 Specifications

General IconGeneral
Matrix size0.59 \
Matrix type3-panel (p-Si TFT active)
Native aspect ratio16:10
Projection distance1.68 - 2.02 m
Projection technology3LCD
Contrast ratio (typical)16000:1
Screen size compatibility30 - 320 \
Projector native resolutionWXGA (1280x800)
Keystone correction, horizontal-30 - 30 °
RMS rated power2 W
FocusManual
Throw ratio1.3 - 1.56
Focal length range16.9 - 20.28 mm
Product typeStandard throw projector
Product colorBlack, White
Market positioningHome cinema
Cable lock slot typeKensington
Lamp typeUHE
Lamp power210 W
Light source typeLamp
Service life of light source6000 h
Service life of light source (economic mode)12000 h
Built-in displayNo
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 / 60 Hz
Power consumption (typical)327 W
Video color modesBlackboard, Cinema, Dynamic, Presentation, sRGB
Analog signal format system-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Noise level37 dB
Noise level (economic mode)28 dB
Weight and Dimensions IconWeight and Dimensions
Depth237 mm
Width302 mm
Height92 mm
Weight2600 g

Related product manuals