Epson EB-X18 User Manual

d
Grip the raised section of the old lamp and remove it.
If the Lamp is cracked, replace it with a new lamp, or contact your
local dealer for further advice.
s Epson Projector Contact List
e
Install the new lamp.
Insert the new Lamp along the guide rail in the correct direction so
that it fits in place, push in firmly, and once it is fully inserted
tighten the two screws.
Replacing Consumables
110

Epson EB-X18 Specifications

General

Native Resolution	XGA (1024 x 768)
Contrast Ratio	10, 000:1
Weight	2.4 kg
Throw Ratio	1.48 - 1.77:1
Projection Size	30 inches - 300 inches
Projection System	3LCD
Lamp Life	5000 hours (Normal), 6000 hours (Eco)
Keystone Correction	Vertical ±30 degrees
Inputs	HDMI, VGA, USB
Dimensions	297 x 234 x 77 mm
Brightness	3000 lumens