Epson EB-X18 User Manual

a
Turn on the projector, and then press the [LAN] button on the
remote control.
The LAN standby screen is displayed.
b
Check that the SSID and IP address information are displayed on
the LAN standby screen, and then remove the Wireless LAN
unit.
c
Connect the Quick Wireless Connection USB Key to the USB-A
port.
d
When the message "Network information update complete.
Remove the Quick Wireless Connection USB Key Adapter." is
displayed, remove the Quick Wireless Connection USB Key.
e
Reinstall the Wireless LAN unit on the projector.
f
Connect the Quick Wireless Connection USB Key to the computer
you are using.
For the steps from here on, see the User's Guide supplied with the
Quick Wireless Connection USB Key.
Connecting Equipment
28

Epson EB-X18 Specifications

General

Native Resolution	XGA (1024 x 768)
Contrast Ratio	10, 000:1
Weight	2.4 kg
Throw Ratio	1.48 - 1.77:1
Projection Size	30 inches - 300 inches
Projection System	3LCD
Lamp Life	5000 hours (Normal), 6000 hours (Eco)
Keystone Correction	Vertical ±30 degrees
Inputs	HDMI, VGA, USB
Dimensions	297 x 234 x 77 mm
Brightness	3000 lumens