Epson EB-X18 User Manual

Indicators Cause Remedy or Status
Power sup‐
ply
Status Lamp Tempera‐
ture
Blue - Flash‐
ing
State de‐
pendant in‐
dication
Orange -
Flashing
State de‐
pendant in‐
dication
Replace Lamp Replace it with a new lamp.
s "Replacing the Lamp" p.108
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp
may explode increases. Replace it with a new lamp as soon as possible.
a
• See the following if the projector is not operating properly, even though the indicators are all showing normal.
s "When the Indicators Provide No Help" p.95
• If the indicators are in a state not shown in this table, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or
the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Problem Solving
94

Epson EB-X18 Specifications

General

Native Resolution	XGA (1024 x 768)
Contrast Ratio	10, 000:1
Weight	2.4 kg
Throw Ratio	1.48 - 1.77:1
Projection Size	30 inches - 300 inches
Projection System	3LCD
Lamp Life	5000 hours (Normal), 6000 hours (Eco)
Keystone Correction	Vertical ±30 degrees
Inputs	HDMI, VGA, USB
Dimensions	297 x 234 x 77 mm
Brightness	3000 lumens