A
The left and right lights indicate the network status.
❏ Green light - left: Turns on while the printer is trying to connect to a wireless (Wi-Fi) network,
or ashes while communicating.
❏ Orange light - right: Flashes when a problem with the printer's wireless (Wi-Fi) network
connection occurs.
The lights ash alternately or simultaneously while initializing or making network settings.
B
Turns the printer on or o.
Do not turn o while the power light is ashing (while the printer is operating or processing
data).
Unplug the power cord when the power light is o.
C
When a network error occurs, pressing this button cancels the error. Hold this button down for
more than three seconds to make Wi-Fi auto setup by using a WPS button on your access point.
See the Network Guide for more details.
D
Hold this button down to print the network status sheet allowing you to check the network
settings and connection status. The PIN code for PIN Code Setup (WPS) is also printed.
E
Starts monochrome copying on A4 size plain paper.
F
Starts color copying on A4 size plain paper.
G
Stops the current operation.
Hold this button down for three seconds until the
P
button ashes to run print head cleaning.
H
Indicates the status of the initial ink charging.
I
Turns on or ashes when paper is out or a paper jam occurs.
Additional functions are available with dierent combinations of buttons.
+ Press the and buttons simultaneously to start monochrome copying in draft mode.
+ Press the and buttons simultaneously to start color copying in draft mode.
+ Press the and buttons simultaneously to run software on a USB-connected
computer and scan as a PDF le.
+ Hold down the and buttons simultaneously for more than three seconds to start PIN
Code Setup (WPS). See the Network Guide for more details.
+ Turn the printer on while holding down the button to restore the default network
settings.
+
Turn the printer on while holding down the
y
button to print the nozzle check pattern.
User's Guide
Printer Basics
15
To Next Page
Loading...
