Epson EcoTank ET-2500 - Running Web Config on a Web Browser; Running Web Config on Windows; Running Web Config on Mac os X

Running Web Cong on a Web Browser
1. Check the printer's IP address.
Press the
button to print the network status sheet, and then check the printer's IP address.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Cong from the maintenance screen of Epson iPrint.
Related Information
& “Using Epson iPrint” on page 39
Running Web Cong on Windows
When connecting a computer to the printer using WSD, follow the steps below to run Web Cong.
1. Access the devices and printers screen in Windows.
❏ Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > Vi e w d e v i c e s a n d p r i nt e r s in Hardware and Sound (or
Hardware).
❏ Wind ows 7
Click the start button, and select Control Panel > Vi e w d e v i c e s a n d p r i nt e r s in Hardware and Sound.
❏ Wind ows Vist a
Click the start button, and select Control Panel > Printers in Hardware and Sound.
2. Right-click on your printer and select Properties.
3. Select the Web S er vice tab and click the URL.
Running Web Cong on Mac OS X
1.
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
2.
Click Options & Supplies> Show Printer Webpage.
User's Guide
Network Service and Software Information
63