Need help?Do you have a question about the Epson ELPSP02 and is the answer not in the manual?
General introduction and explanation of safety symbols used in the manual.
Critical warnings and instructions for safe product installation to prevent falls and injuries.
Essential warnings and cautions for safe operation, handling, and maintenance.
Instructions for safely storing and moving the product to avoid damage or hazards.
Manufacturer's statement of compliance with FCC regulations for the product.
Detailed information regarding FCC rules and potential interference for US users.
Lists all the components and accessories provided with the active speaker system.
Visual guide illustrating how to connect the speakers to the power source and audio devices.
Step-by-step instructions for installing the speakers, including safety wire and adaptor holder.
Detailed steps for securely mounting the speakers onto a wall surface.
Comprehensive technical details, dimensions, and performance data for the active speakers.
Power| output power | 15 W rms |
|---|---|
| power supply voltage | 100 – 240 V AC/DC |
| power frequency | 50/60 Hz |
| power consumption | 45 W |
| power consumption (standby mode) | less than 0.7 W |
Audio| frequency response | 80 Hz – 20 kHz |
|---|---|
| sound pressure level (SPL) | 100 dB at 1 W at 1 m |
| impedance | 8 ohm |
Operating Environment| operating temperature | 41 °F to 95 °F |
|---|---|
| operating humidity | 20% – 80% RH |
Weight and Dimensions| active speaker dimensions | 6.1" x 9.1" x 5.6" |
|---|---|
| active speaker weight | 4.6 lb |
| passive speaker dimensions | 6.1" x 9.1" x 5.6" |
| passive speaker weight | 4.2 lb |
| packaging dimensions | 7.9" x 14" x 11.8" |
| packaging weight | 12.1 lb |
To Next Page
