Turn on your projector
Note: If you are projecting from an external video device or computer, make sure it is connected to
the projector first.
Plug in the projector.
Press the power button on the projector or remote control. The status light flashes blue and
then stays on.
Follow the on-screen instructions to pair the remote control and projector, select your language,
connect to your wireless network, and sign in to your Google account.
Note: To shut down the projector, press the power button.
Adjust the image
1. To reduce or enlarge the image, move the projector closer to or farther away from the screen.
2. To adjust the image height, press and hold the foot release lever on the bottom of the projector to
extend the front adjustable foot. Release the lever to lock the foot in the desired position.
To Next Page
Loading...
