Epson ESC/VP21 - ESC;VP21 Command Formats; Applicable Models

ESC/VP21 Command User’s Guide for Business Pro
j
ectors
2. ESC/VP21 Command Formats
2.1. Set command format
A set command consists of a command and a parameter. Projector returns a colon after executing the command.
There are two types of parameters. One is fixed such as ON, OFF, or 21. Other is a step parameter such as INC, DEC or
INIT.
INC: increments the parameter by one.
DEC: decrements the parameter by one.
INIT: initializes the parameter.
2.2. Get command format
A get command consists of a command and ?. Projector returns a response parameter after executing the command.
2.3. Null command
The null command is as command code of the return key code (Hex 0D). Projector returns a colon。The null command
can be used to confirm that the projector is in operation.
2.4. Illegal commands
Projector returns “ERR” and a return key code (Hex 0D) and a colon when it receives invalid commands.
ERR
：
3. Applicable models
EMP-600/800/8110/811/820, 30/52, 720/730/520, 73/83/74/54, 735, 8300/9300, 7800/7850, S1/S1H, 61/81, 830/835, 740/745/732/737, 821/828,
7900/7950, S3/S4, 765/760, 755/750, 62/82/X3, 1715/1710/1705/1700, 6000/6100, 1815/1810, S5/X5/83/822, 260/280, 6010/6110, 400W/410W,
83+/822+, 1825/, EX90, G5350/G5300/G5150/G5100/G5200W/G5000, S6/X6/W6, 1735W/1730W/1725/1720, Z80000WU/Z8050W,S7/X7/W7,
S8/X8/W8, 1830/1900/1910/1915/1920W/1925W, 440W, 450W/We/Wi, 460/e/i, 84H/He/L, 85H/HV,824H, 825H/HV, 826WH/WHV, 84+, 85+,
825+/826W+, S10/W10/X10, S9/X9/W9, S92/X92, 1760W/1770W/1775W/1750, G5950/G5900/G5800/G5650W/G5600/G5500/G5750WU/G5450WU,