Call Us: a (408) 394-7595 • www.inkjetbiz.com
SUPPORT
INKJETBIZ
TB-ET2750
103-19
2. Unpacking the ink bottles (Follow the Instructions)
3. Filling the ink tanks.
a. Open the ink tank cover, then open the cap for the ink tank you are
going to fill.
ET-2750 Start up Guide
How to load Dye Sublimation Ink on 4 Colors Epson Ecotank Printer
This guide describes the procedure on how to load Dye Sublimation Ink into the printer.
*ET 2750 pictures below but this instructions will work for other 4 Color ET units.
Menus may vary but selections remain the same.
1. Unpack and remove all protective materials from the product.
c. Put the lower part of the cap
back on the bottle and load the inks
as shown.
b. Unscrew the entire Cap. Break or
remove the Aluminum Seal
a. Take the bottle out of the poly bag
and remove the Black Tape
To Next Page
