4 Setting Up Wi-Fi from the Control Panel
Setting Up Wi-Fi from the Control Panel
The software installer may automatically set up your wireless connection. If it doesn’t, you
can connect to your wireless network using the product’s control panel.
1. Press , if necessary.
2. Press u or d, select
Wi-Fi Setup, and press OK.
You see this screen:
3. Select
Wi-Fi Setup Wizard and press OK.
4. Select the name of your wireless network from the list and press
OK.
5. Enter your wireless password using the numeric keypad.
Note: If your password contains uppercase or lowercase letters, make sure to enter them
correctly.
■ Press a button on the keypad repeatedly to scroll through characters (uppercase,
lowercase, or numbers).
■ Press r to move to the next character.
■ Press l to delete incorrect characters.
6. Press
OK when you finish entering your password.
7. Confirm the displayed network settings and press
OK to save them.
Note: If you need to change a setting, press .
8. If you want to print a network setup report, press one of the Start buttons.
Otherwise, press
OK.
If the network connection is successful, the icon appears in the corner of the LCD
screen.
Deco_MDL Quick Guide.book Page 4 Monday, April 25, 2016 2:31 PM
To Next Page
Loading...
