Why can't I monitor my Epson Software projector in standby mode?
To monitor and control the Epson projector using EasyMP Monitor when it's in standby mode, ensure the projector's Standby Mode is set to Communication On (or Network On), or that Network Monitoring is set to On within the configuration menu.
What to do if an e-mail message is not sent when a problem occurs with an Epson Software projector?
If you are not receiving email notifications when there's an issue with your Epson projector, verify that the SMTP server IP address, Port Number, and Recipient mail address have all been entered correctly in the settings.
How to fix Epson Software projectors that cannot be monitored or controlled?
If the Epson projector cannot be monitored or controlled, check the following: 1. Ensure the network cable is correctly connected; reconnect if necessary. 2. Verify the Network configuration settings. 3. Reinstall EasyMP Monitor. 4. Register the projectors you intend to monitor or control.
Why is my Epson Software projector not sending e-mail alerts after a critical error?
If your Epson projector has momentarily stopped working due to a critical problem, it won't be able to send email messages. If the projector cannot be reset after checking, contact Epson.
General| Matrix type | 3-panel (p-Si TFT active) |
|---|---|
| Number of colors | 1.073 billion colors |
| Native aspect ratio | 4:3 |
| Projection distance | 0.9 - 9 m |
| Projection technology | 3LCD |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projection distance (tele) | 9 - 9 m |
| Projection distance (wide) | 0.9 - 0.9 m |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, horizontal | -30 - 30 ° |
| Focus | Manual |
| Throw ratio | 1.48 - 1.77:1 |
| Zoom capability | Yes |
| Focal length range | 16.9 - 20.28 mm |
| Aperture range (F-F) | 1.58 - 1.72 |
| Lamp type | UHE |
| Lamp power | 200 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 6000 h |
| Service life of light source (economic mode) | 5000 h |
| Full HD | No |
| Video processing | 10 bit |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 640 x 480 (VGA) |
| USB connector type | USB Type-A, USB Type-B |
| USB 2.0 ports quantity | 2 |
| Component video (YPbPr/YCbCr) in | 0 |
| HDCP | - |
| Noise level | 37 dB |
| Noise level (economic mode) | 29 dB |
| RMS rated power | 2 W |
| Placement | Desktop, Ceiling |
| Product type | Standard throw projector |
| Product color | Black |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| Voltage tolerance | 10 % |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 283 W |
| Power consumption (economy mode) | 207 W |
| Operating temperature (T-T) | 5 - 35 °C |
Weight and Dimensions| Depth | 228.6 mm |
|---|---|
| Width | 294.64 mm |
| Height | 76.2 mm |
| Weight | 2399.5 g |
Overview of the projector's key capabilities and technologies.
Lists all items included in the projector's packaging.
Details on product warranty, registration, and support services.
Identification of components on the front and top of the projector.
Identification of components and ports on the rear of the projector.
Overview of the buttons and indicators on the projector's control panel.
Identification and function of buttons on the projector's remote control.
Guidelines for positioning the projector for optimal viewing.
Information on determining the correct distance for desired image size.
Instructions for connecting various types of computers to the projector.
Steps for connecting external video devices like DVD players or cameras.
Guidance on connecting USB flash drives or cameras for direct projection.
Procedure for inserting batteries into the remote control.
Step-by-step guide to powering on the projector.
Procedures for safely shutting down the projector.
How to adjust and correct the projected image's geometry.
Explanation of how to use the remote control for projector functions.
Navigating the projector's on-screen menu system for adjustments.
Adjusting parameters like color, brightness, and contrast for optimal image display.
Configuring settings related to the incoming video signal source.
Customizing various features and operational aspects of the projector.
Routine tasks to keep the projector in good working condition.
Procedures for replacing and managing the projector lamp.
Interpreting indicator lights to diagnose projector issues.
Troubleshooting common issues with projected images or audio output.
Resolving issues related to connecting and operating the projector on a network.
Detailed technical data and parameters of the projector.
List of compatible video signal formats and resolutions.
Minimum system requirements for using the projector's USB Display software.
Critical safety precautions for setup and operation.
Detailed safety guidelines to prevent hazards and damage.
To Next Page
