Why can't I monitor my Epson Software projector in standby mode?
To monitor and control the Epson projector using EasyMP Monitor when it's in standby mode, ensure the projector's Standby Mode is set to Communication On (or Network On), or that Network Monitoring is set to On within the configuration menu.
What to do if an e-mail message is not sent when a problem occurs with an Epson Software projector?
If you are not receiving email notifications when there's an issue with your Epson projector, verify that the SMTP server IP address, Port Number, and Recipient mail address have all been entered correctly in the settings.
How to fix Epson Software projectors that cannot be monitored or controlled?
If the Epson projector cannot be monitored or controlled, check the following: 1. Ensure the network cable is correctly connected; reconnect if necessary. 2. Verify the Network configuration settings. 3. Reinstall EasyMP Monitor. 4. Register the projectors you intend to monitor or control.
Why is my Epson Software projector not sending e-mail alerts after a critical error?
If your Epson projector has momentarily stopped working due to a critical problem, it won't be able to send email messages. If the projector cannot be reset after checking, contact Epson.
General| Matrix type | 3-panel (p-Si TFT active) |
|---|---|
| Number of colors | 1.073 billion colors |
| Native aspect ratio | 16:10 |
| Projection distance | 0.9 - 9 m |
| Projection technology | 3LCD |
| Contrast ratio (typical) | 10000:1 |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, horizontal | -30 - 30 ° |
| Focus | Manual |
| Throw ratio | 1.3 - 1.56:1 |
| Zoom capability | Yes |
| Focal length range | 16.9 - 20.28 mm |
| Aperture range (F-F) | 1.58 - 1.72 |
| Lamp type | UHE |
| Lamp power | 200 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 5000 h |
| Service life of light source (economic mode) | 6000 h |
| Full HD | No |
| Video processing | 10 bit |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 640 x 480 (VGA), 1024 x 768 (XGA), 1152 x 864 (XGA+), 1440 x 1050, 1440 x 900 (WXGA+) |
| USB connector type | USB Type-A, USB Type-B |
| USB 2.0 ports quantity | 2 |
| Noise level | 37 dB |
| Noise level (economic mode) | 29 dB |
| RMS rated power | 2 W |
| Placement | Desktop, Ceiling |
| Product type | Standard throw projector |
| Product color | Black |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 207 W |
| Power consumption (typical) | 283 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Remote control type | IR |
Weight and Dimensions| Depth | 228.6 mm |
|---|---|
| Width | 294.64 mm |
| Height | 76.2 mm |
| Weight | 2399.51 g |
Overview of projector capabilities and advantages.
Lists items included in the projector packaging.
Identifies components on the front and top of the projector.
Identifies components on the rear of the projector.
Identifies buttons and indicators on the projector's control panel.
Identifies buttons and functions of the remote control.
Guidelines for positioning the projector for optimal viewing.
Information on determining the correct distance for image size.
Instructions for connecting various computer video/audio inputs.
Instructions for connecting external video devices.
Guide for using USB flash drives and other storage.
Setup for projecting content wirelessly.
Configuration steps for manual network setup.
Steps to power on the projector and start operation.
How to modify image position using adjustable feet.
Techniques for correcting image distortion.
Usage guide for the projector's remote control.
Options for orienting the projected image.
Adjusting color settings for optimal display.
Muting video and audio during presentations.
Options for securing the projector against theft or unauthorized use.
Navigating and operating the projector's on-screen menu system.
Adjusting parameters like brightness, contrast, color.
Optimizing settings based on the input signal type.
Customizing various projector operational features.
General care and upkeep for the projector.
Information on replacing the projector lamp.
Guidelines for safely moving or shipping the projector.
General troubleshooting steps for common issues.
Interpreting indicator lights to diagnose problems.
Solutions for issues related to projected visuals and audio.
Overall technical details of the projector.
List of compatible video input signals and resolutions.
Minimum system requirements for USB display software.
Critical safety warnings and precautions.
Regulatory compliance information for the US.
Details of open-source software licenses used in the product.
To Next Page
