Epson Expression 11000XL

Home > Using the Transparency Unit
Installing the Transparency Unit
Follow the steps below to install the Transparency Unit.
Make sure the scanner is turned off, and then unplug the power cord from the scanner.
Open the scanner’s document cover, and then remove it by lifting the cover straight up.
Align the pins of the unit with the holes of the scanner, and then lower the Transparency Unit
until it rests securely on the scanner with the pins in the holes.
Page 1 of 3Installing the Transparency Unit
4/12/2013mhtml:htt
p
://share
p
oint01/su
pp
ort/FAQ/Lists/Ea
g
leSoft FAQ Re
q
uests/Attachments/4123
/
...
18348_Epson_11000XL_Transparency_Unit_Installation_Instructions_Rev.1_4.17.2013