Epson FX-2175II User Manual

Connecting the Printer to Your Computer
Connecting the Power Cord
I nstalling the Printer Software
Getting More Informations
The contents of this manual are subject to change without notice.
Illustrations of the printer used in this manual are examples only. Although there may be slight differences depending on the model,
the method of operation is the same.
© 2017 Seiko Epson Corporation
Printed in XXXXXX
3
c
Caution:
❏ The interface cable connectors have only one correct orientation. Make sure the orientation of the connector is correct
before inserting it into the appropriate port.
❏ Do not connect or disconnect the printer while it is turning on.
Connect firmly
IEEE1284 (PARALLEL)
Connect firmly and fasten
USB
Connect firmly
Connect firmly
4
OFF
5
Note:
Installing the printer software may require administrator privileges. If you have problems, ask your administrator for
more information.
From Web site
You can download the printer software and the utility software (EPSON Status Minitor3) from the Epson web site. Download the
software to any directory on your computer, and start installing it.
http://www.epson.com
Follow the
instructions
If User Account Control window
appears, click Yes
Confirm the (OFF)
OFF
From CD-ROM
Insert
6
Now setup is finished and the printer is ready.
For detailed information about the printer and troubleshooting, refer to the User's Guide.
Select Information for Manuals and Applications, then select Manuals to see the User's Guide.
If you cannot find the information you require in the User's Guide, visit our Web site:
Note:
The User's Guide for the FX-2175IIN is shared with the FX-2175II User's Guide.
Continued

Epson FX-2175II Specifications

General

Print Method	Impact Dot Matrix
Connectivity	USB, Parallel
Emulations	ESC/P, IBM PPDS
Paper Handling	Friction feed
Print Direction	Bidirectional (logic seeking)
Paper Path	Rear
Noise Level	55 dB(A)
Number of Pins	9 pins