What to do if paper release lever is set to the wrong position in Epson FX-2190IIN?
Set the paper release lever to the position for the paper source you want to use. If paper from another paper source is currently in the paper path, press the Load/Eject button to eject the paper; then move the paper release lever to the desired position.
What to do if an unknown error occurred on Epson Printer?
Turn off the printer and leave it off for several minutes; then turn it on again. If the error occurs again, contact your dealer.
What to do if Epson FX-2190IIN is hung-up?
Turn the printer off and wait for a while. Then, turn the printer on again, and start printing.
What to do if Epson FX-2190IIN print head is overheated?
Wait for a few minutes; the printer resumes printing automatically once the print head cools.
How to feed continuous paper to the standby position on Epson FX-2190IIN?
Tear off the printed pages at the perforation. Then press the Load/ Eject button to feed the paper backward to the standby position.
How to turn on Epson FX-2190IIN Printer?
Turn on the printer. The Power light should come on.
What to do if Epson FX-2190IIN Printer ribbon has slack or is loose?
Remove any slack in the ribbon by turning the ribbon-tightening knob, or reinstall the ribbon cartridge.
What to do if paper-thickness lever is set incorrectly in Epson FX-2190IIN Printer?
Set the paper-thickness lever to match the thickness of your paper.
What to do if Epson FX-2190IIN interface cable is broken?
Check that the interface cable is not broken or twisted. If you have another interface cable, replace the cable and check whether the printer works correctly.
What to do if Epson FX-2190IIN Printer has no paper loaded?
Load paper in the printer or select a different paper source until the Paper Out light goes off. Then press the Pause button; the Pause light goes off and the printer starts printing.
General| Color | - |
|---|---|
| Bitmap fonts | Draft, OCR-B, Roman, Sans Serif |
| Character sets | Italic, PC437, PC850, PC858, Roman 8 |
| Character pitch | 10, 12 cpi |
| Built-in barcodes | CODABAR (NW-7), Code 128 (A/B/C), Code 39, Industrial 2/5, Matrix 2/5, POSTNET, UPC-A, UPC-E |
| Maximum resolution | 240 x 144 DPI |
| Number of characters | 42 |
| Maximum number of copies | 6 copies |
| Maximum print speed (NLQ) | 115 cps |
| Maximum print speed (draft) | 612 cps |
| Maximum printing width (columns) | 136 |
| Print yield | 12 characters |
| Print direction | Bi-directional |
| Ribbon life (black, draft) | 12 million characters |
| Mean time between failures (MTBF) | 25000 h |
| Sustainability certificates | ENERGY STAR |
| Standard interfaces | Ethernet, Parallel, USB |
| Paper tray media types | Envelopes |
| Single sheet thickness range | 0.06 - 0.14 mm |
| Continuous paper thickness range | 0.46 - 0.46 mm |
| Multi-part paper thickness range | 0.12 - 0.46 mm |
| AC input voltage | 198-264 V |
| Power consumption (standby) | 10 W |
| Power consumption (typical) | 55 W |
| Storage temperature (T-T) | -30 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 30 - 60 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| Product color | Black |
| Country of origin | Indonesia |
| Sound pressure level (printing) | 55 dB |
| Needles | 18 (2 x 9) |
| Print technology | Dot matrix |
| Connectivity technology | Wired |
| Pallet width | 800 mm |
| Pallet height | 2250 mm |
| Pallet length | 1200 mm |
| Pallet weight | 0 g |
| Pallet width (UK) | 1000 mm |
| Quantity per pallet | 14 pc(s) |
| Quantity per pallet (UK) | 21 pc(s) |
| Quantity per pallet layer | 2 pc(s) |
| Harmonized System (HS) code | 84433210 |
| Quantity per pallet layer (UK) | 3 pc(s) |
| Package depth | 735 mm |
| Package width | 455 mm |
| Package height | 300 mm |
| Package weight | 12160 g |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 375 mm |
|---|---|
| Width | 612 mm |
| Height | 177 mm |
Guides on choosing the appropriate paper source for various printing needs, including single sheets and continuous paper.
Detailed instructions for loading continuous paper using different tractor positions for optimal feeding and printing.
Steps for loading single sheets and envelopes one at a time using the rear and front bypass tray or sheet guide.
Instructions on how to modify printer settings via Layout, Paper/Quality, and Utility menus for customized printing.
Overview of the printer's control panel buttons and indicator lights, explaining their functions and states.
Guide to diagnosing printer problems by observing control panel lights and beep patterns, with corresponding solutions.
A comprehensive section addressing common printer issues and providing solutions for power, paper, and print quality problems.
Troubleshooting steps for issues related to power supply, including lights not turning on or going off unexpectedly.
Detailed instructions on how to safely remove jammed paper from the printer to restore operation.
To Next Page
