D
Donna StevensonAug 21, 2025
What to do if Epson Printer interface cable is not plugged in securely?
- AAndrew HigginsAug 21, 2025
Check that both ends of the cable between the printer and the computer are plugged in securely.
To Next PageTo Next PageWhat to do if Epson Printer interface cable is not plugged in securely?
Check that both ends of the cable between the printer and the computer are plugged in securely.
What to do if an unknown error occurred on Epson Printer?
Turn off the printer and leave it off for several minutes; then turn it on again. If the error occurs again, contact your dealer.
What to do if Epson FX-2190IIN is hung-up?
Turn the printer off and wait for a while. Then, turn the printer on again, and start printing.
What to do if Epson FX-2190IIN print head is overheated?
Wait for a few minutes; the printer resumes printing automatically once the print head cools.
How to feed continuous paper to the standby position on Epson FX-2190IIN?
Tear off the printed pages at the perforation. Then press the Load/ Eject button to feed the paper backward to the standby position.
How to turn on Epson FX-2190IIN Printer?
Turn on the printer. The Power light should come on.
What to do if Epson Printer power cord is unplugged?
Check that the power cord is properly plugged into the electrical outlet.
How to unpause Epson FX-2190IIN Printer?
Press the Pause button to turn off the Pause light. This should unpause your Epson printer.
What to do if Epson FX-2190IIN electrical outlet does not work?
Try using a different outlet to power your Epson printer.
What to do if Epson FX-2190IIN Printer has no paper loaded?
Load paper in the printer or select a different paper source until the Paper Out light goes off. Then press the Pause button; the Pause light goes off and the printer starts printing.
General| Color | - |
|---|---|
| Bitmap fonts | Draft, OCR-B, Roman, Sans Serif |
| Character sets | Italic, PC437, PC850, PC858, Roman 8 |
| Character pitch | 10, 12 cpi |
| Built-in barcodes | CODABAR (NW-7), Code 128 (A/B/C), Code 39, Industrial 2/5, Matrix 2/5, POSTNET, UPC-A, UPC-E |
| Maximum resolution | 240 x 144 DPI |
| Number of characters | 42 |
| Maximum number of copies | 6 copies |
| Maximum print speed (NLQ) | 115 cps |
| Maximum print speed (draft) | 612 cps |
| Maximum printing width (columns) | 136 |
| Print yield | 12 characters |
| Print direction | Bi-directional |
| Ribbon life (black, draft) | 12 million characters |
| Mean time between failures (MTBF) | 25000 h |
| Sustainability certificates | ENERGY STAR |
| Standard interfaces | Ethernet, Parallel, USB |
| Paper tray media types | Envelopes |
| Single sheet thickness range | 0.06 - 0.14 mm |
| Continuous paper thickness range | 0.46 - 0.46 mm |
| Multi-part paper thickness range | 0.12 - 0.46 mm |
| AC input voltage | 198-264 V |
| Power consumption (standby) | 10 W |
| Power consumption (typical) | 55 W |
| Storage temperature (T-T) | -30 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 30 - 60 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| Product color | Black |
| Country of origin | Indonesia |
| Sound pressure level (printing) | 55 dB |
| Needles | 18 (2 x 9) |
| Print technology | Dot matrix |
| Connectivity technology | Wired |
| Pallet width | 800 mm |
| Pallet height | 2250 mm |
| Pallet length | 1200 mm |
| Pallet weight | 0 g |
| Pallet width (UK) | 1000 mm |
| Quantity per pallet | 14 pc(s) |
| Quantity per pallet (UK) | 21 pc(s) |
| Quantity per pallet layer | 2 pc(s) |
| Harmonized System (HS) code | 84433210 |
| Quantity per pallet layer (UK) | 3 pc(s) |
| Package depth | 735 mm |
| Package width | 455 mm |
| Package height | 300 mm |
| Package weight | 12160 g |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 375 mm |
|---|---|
| Width | 612 mm |
| Height | 177 mm |
