Epson FX-890IIN - User Manual

Other manuals for Epson FX-890IIN

Network Guide60 pages

Quick Start Guide4 pages

Start Here2 pages

Questions and Answers

I
Ian FosterSep 10, 2025
What to do if paper release lever is set to the wrong position in Epson FX-890IIN Printer?
- T
  Tonya PierceSep 10, 2025
  Set the paper release lever to the position for the paper source you want to use. If paper from another paper source is currently in the paper path, press the Load/Eject button to eject the paper; then move the paper release lever to the desired position.
K
Karina ShawAug 22, 2025
What to do if an unknown error occurred on Epson FX-890IIN?
- B
  Brian ChandlerAug 23, 2025
  Turn off the printer and leave it off for several minutes; then turn it on again. If the error occurs again, contact your dealer.
W
watkinslouisAug 25, 2025
What to do if Epson FX-890IIN is hung-up?
- S
  smithcharlesAug 25, 2025
  Turn the printer off and wait for a while. Then, turn the printer on again, and start printing.
D
Donald PerezAug 26, 2025
What to do if Epson FX-890IIN print head is overheated?
- B
  Brittney DavisAug 26, 2025
  Wait for a few minutes; the printer resumes printing automatically once the print head cools.
B
Brandon PowellAug 27, 2025
How to feed continuous paper to the standby position on Epson FX-890IIN Printer?
- D
  Daniel FreemanAug 27, 2025
  Tear off the printed pages at the perforation. Then press the Load/ Eject button to feed the paper backward to the standby position.
J
Julia HarrisAug 29, 2025
How to turn on Epson FX-890IIN?
- C
  Corey RichardsonAug 29, 2025
  Turn on the printer. The Power light should come on.
K
Kaitlin McphersonSep 18, 2025
What to do if Epson FX-890IIN ribbon has slack or is loose?
- C
  crystalmcdanielSep 18, 2025
  Remove any slack in the ribbon by turning the ribbon-tightening knob, or reinstall the ribbon cartridge.
D
David SharpSep 12, 2025
What to do if paper-thickness lever is set incorrectly in Epson FX-890IIN Printer?
- W
  wjacobsSep 12, 2025
  Set the paper-thickness lever to match the thickness of your paper.
L
Laura ShawSep 8, 2025
What to do if Epson FX-890IIN interface cable is broken?
- A
  Amanda ReynoldsSep 8, 2025
  Check that the interface cable is not broken or twisted. If you have another interface cable, replace the cable and check whether the printer works correctly.
J
Juan WiseSep 5, 2025
What to do if Epson FX-890IIN Printer has no paper loaded?
- J
  Jason JacobsonSep 5, 2025
  Load paper in the printer or select a different paper source until the Paper Out light goes off. Then press the Pause button; the Pause light goes off and the printer starts printing.