To Next Page
A
Amanda VanceAug 21, 2025
What to do if Epson Printer interface cable is not plugged in securely?
- JJasmine SmithAug 21, 2025
Check that both ends of the cable between the printer and the computer are plugged in securely.
What to do if Epson Printer interface cable is not plugged in securely?
Check that both ends of the cable between the printer and the computer are plugged in securely.
What to do if an unknown error occurred on Epson FX-890IIN?
Turn off the printer and leave it off for several minutes; then turn it on again. If the error occurs again, contact your dealer.
What to do if Epson FX-890IIN is hung-up?
Turn the printer off and wait for a while. Then, turn the printer on again, and start printing.
What to do if Epson FX-890IIN print head is overheated?
Wait for a few minutes; the printer resumes printing automatically once the print head cools.
How to feed continuous paper to the standby position on Epson FX-890IIN Printer?
Tear off the printed pages at the perforation. Then press the Load/ Eject button to feed the paper backward to the standby position.
How to turn on Epson FX-890IIN?
Turn on the printer. The Power light should come on.
What to do if Epson FX-890IIN Printer power cord is unplugged?
Check that the power cord is properly plugged into the electrical outlet.
How to unpause Epson FX-890IIN Printer?
Press the Pause button to turn off the Pause light. This should unpause your Epson printer.
What to do if Epson FX-890IIN electrical outlet does not work?
Try using a different outlet to power your Epson printer.
What to do if Epson FX-890IIN Printer has no paper loaded?
Load paper in the printer or select a different paper source until the Paper Out light goes off. Then press the Pause button; the Pause light goes off and the printer starts printing.
General| Type | Dot Matrix Printer |
|---|---|
| Number of Pins | 24 |
| Noise Level | 55 dB |
| Interface | USB, Serial, Parallel |
| Paper Handling | Friction feed |
