Motorised sheet feeders
For high volume cut sheet printing,
optional motorised cut sheet feeders
are available for selected products,
like the 150 sheet cut sheet feeder
for the LQ-2180. Equipped with
productivity enhancing, independent
motor drives, these feeders reduce
paper handling time and ensure
optimum paper throughput.
Paper feed tractors
A choice of push, pull, and push/pull
combined tractors not only enable
more than one stationery type to be
permanently loaded for delivery on
demand, but handle continuous and
multi-part stationery more efficiently.
Roll paper holder
This provides an inexpensive
alternative to using continuous roll
paper for applications requiring
variable paper lengths.
*Using Epson paper handling options
Optional equipment
A comprehensive range of Epson
paper handling options includes:
Cut sheet feeders
Tractor unit
Cut sheet feeders
Offering 50, 150 and 250 sheet,
for automatic selection of forms
and plain stationery.
• Cut sheet manual feed front in –
front out
• Optional 150 sheet cut sheet feeder
• Optional 50 sheet cut sheet feeder
• Tractor fed continuous
Flat
paper path
• Three continuous paper paths – front,
rear, and bottom
• Two cut sheet paper paths – front
and top
Typical Paper Paths
- 5 -
LX-300+II FX-890 FX-2190 DFX-9000 LQ-590 LQ-680Pro LQ-2090 LQ-2180
Ribbon Cartridge
(black, fabric)
Single Bin
Cut-Sheet Feeder
High Capacity
Cut-Sheet Feeder
Second Bin
Cut-Sheet Feeder*
Roll Paper Holder
Additional
Tractor Unit
Paper Cutter/
Perforation Cutter
10/100 Base-
TX Ethernet
Serial
Bidirectional
Parallel
8750 S015329 S015335
C806371 C806371 C806391
N/A C806381 C806401
N/A N/A N/A
8310 8310 N/A
C800301 C800201 C800211
N/A N/A N/A
C823781
(external)
C12C824352 C12C824352
ON-BOARD C12C824431 C12C824431
N/A
ON-BOARD
S015384 S015337 7762L S015335 S015086
N/A C806371 N/A C806391 N/A
N/A C806381 C806871 C806401 C806731
N/A N/A C806791 C806741 C806741
N/A 8310 8310 8310 8310
C12C800381 C800201 N/A C800211 C800321
C815071 N/A N/A N/A N/A
C12C824352 C12C824352 C12C824352 C12C824352 C12C824352
ON-BOARD C12C824431 C12C824431 C12C824431C12C824431
Interface Boards
for Type B Slot
*Must be used in combination with High Capacity Cut-Sheet Feeder
Accessories
To Next Page
Loading...
Need help?
General
