3. Press the up or down arrow button, select Date/Time Settings, and press the OK button.
You see a screen like this:
4. Press the up or down arrow button, select Date/Time, and press the OK button.
5. Select the date format you want to use.
6. Use the numeric keypad to enter the current date and press the OK button.
7. Select the time format you want to use and press the OK button.
8. Use the numeric keypad to enter the current time and press the OK button.
9. Press the up or down arrow button, select Date/Time Settings, and press the OK button.
10. Press the up or down arrow button, select Daylight Saving Time, and press the OK button.
11. Select the setting that applies to your area:
• Winter: it is winter or your region does not use Daylight Saving Time (DST)
• Summer: it is spring or summer and your region uses Daylight Saving Time (DST)
Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the
season. When you change from Winter to Summer, your product automatically sets its clock ahead
one hour. When you change from Summer to Winter, it sets its clock back one hour.
12. If necessary, select Time Difference and use the up or down arrow button to set the difference
between UTC (Coordinated Universal Time) and your time zone.
Parent topic: Setting Up Fax Features Using the Product Control Panel
150
To Next Page
Loading...
Need help?
General
