Epson Moverio Pro BT-2000 - Available Parameters

MOVERIO Pro Developer's Guide (Rev.1.4)
67
6.3. Available parameters
A list of available parameters is provided in table 6-2 and 6-3.
Table 6-2 List of available parameters
Parameter name
Setting region
Default value
Camera Mode
single-through-vga / single-through-720p /
single-through-1080p / single-through-5m /
depth-only / side-by-side / EDof
Single-through-720p
Preview resolution
*1
1080p / 720p / VGA
720p
Video resolution
720p/VGA
-
Depth ON/OFF
*1
OFF/ON
OFF
Frame rate
*1
60/30/15/7.5
15
Exposure
comensation
*2
-5 to +6
0
White balance
*2
Daylight/ Fluorescent/ Warm florescent
Fluorescent
Sharpness
-3 to +3
0
Contrast
-3 to +3
0
*1: The available range varies depending on the mode. See table 6-3 for more information.
*2: Auto exposure works from system software version R1.4.0, and will automatically change the exposure setting
according to surround brightness. If the result of auto exposure is too bright or toodark, please compensate the
brightness by exposure compensation.
*3: White balance is set manually. Make setting according to your usage environment.
Table 6-3 List of main parameter combinations
Camera Mode
Still image
resolution
Preview resolution
Frame rate
single-through-vga
640x480
640x480
7.5fps
15fps
30fps
60fps
single-through-720p
1280x720
640x480
1280x720
7.5fps
15fps
30fps
single-through-1080p
1920x1080
640x480
1280x720
1920x1080
7.5fps
15fps
single-through-5m
2576x1936
640x480
1280x720
1920x1080
7.5fps
depth-only
-
-
7.5fps
15fps
side-by-side
side-by-side
4096x1936
640x480
EDof
2576x1936
640x480
1280x720
7.5fps