Epson P-2000 Instructions To Perform Firmware Update

Multimedia Storage Viewer P-2000/P-4000 - Instructions to perform Firmware Update
Page 4 of 4
Step 6
• Once the process is completed you will see the message “Resources
Updated Successfully” and be asked to shutdown and restart the P-
2000 (see below image). Remove the CF or SD card after shutting
down.
• After restarting, you may check the new firmware by going to the
“Settings” screen and looking at the bottom right hand corner. This
should confirm the new firmware version.

Epson P-2000 Specifications

General

Brand	Epson
Model	P-2000
Category	Portable Multimedia Player
Language	English