Setting Options Description
Input Signal Auto Specifies the signal type from
input sources connected to
RGB
computer ports
Component
Auto: detects signals
automatically
RGB: corrects color for
computer/RGB video inputs
Component: corrects color for
component video inputs
Video Signal Auto Specifies the signal type from the
input sources connected to the
Various video standards
video ports
Auto: detects signals
automatically
Aspect See the list of available aspect Sets the aspect ratio (width-to-
ratios height ratio) for the selected input
source
Overscan Auto Changes the projected image
ratio to make the edges visible by
Off
a selectable percentage or
4%
automatically
8%
Image Processing Fine Adjusts image processing
speed/quality
Fast
Note: The Noise Reduction setting is not available if you have done the following:
• Set the Image Processing option to Fast
• Set the Progressive setting to Off
• Selected a digital RGB or an interlaced (480i/567i/1080i) input signal
Parent topic: Adjusting the Menu Settings
124
To Next Page
Loading...
