Epson PowerLite 1825 - User Manual

Other manuals for Epson PowerLite 1825

Quick Setup2 pages

Product Specification2 pages

Declaration Of Conformity4 pages

Parts List1 page

Questions and Answers

T
Thomas PerezAug 10, 2025
Why can't I monitor or control my Epson Software projector?
- B
  Brandon RamseyAug 10, 2025
  If Epson Software EasyMP Monitor cannot monitor or control the projector, first ensure the network cable is correctly connected; if not, reconnect it. Then, verify the settings in the Network configuration menu. Also, confirm that EasyMP Monitor is correctly installed on your computer by uninstalling and reinstalling it. Ensure all projectors are registered. Finally, the projector's Standby Mode should be set to Communication On (or Network On), or Network Monitoring should be set to On in the configuration menu to enable monitoring and control via EasyMP Monitor in standby mode.
R
Richard MillerAug 15, 2025
What to do if Epson Software doesn't send e-mail messages when a problem occurs?
- D
  Dr. Samuel HowardAug 15, 2025
  If you are not receiving e-mail notifications from Epson Software when a problem occurs, check that the SMTP server IP address, Port Number, and Recipient mail address are correctly configured. Also, ensure the projector's Standby Mode is set to Communication On (or Network On) or Network Monitoring is set to On in the configuration menu. If the projector has momentarily stopped working due to a critical problem, it won't be able to send e-mails; in this case, and if the projector cannot be reset after checking, contact Epson. Finally, verify that the projector is receiving power and that the circuit breaker hasn't tripped.
J
Joshua RodriguezAug 21, 2025
Why can't I monitor my Epson Monitor when it's in standby mode?
- T
  Tonya GarciaAug 22, 2025
  To monitor and control the Epson Monitor when it is in standby mode, the 'Network Monitoring' or 'Standby Mode' configuration menu must be set to 'ON' or 'Network ON'.
S
Sean DavisAug 27, 2025
What to do if I don't receive email notifications for my Epson Monitor?
- J
  Jose PeckAug 27, 2025
  If you are not receiving email notifications when a problem occurs with your Epson Monitor, ensure that the 'Network Monitoring' or 'Standby Mode' configuration menu is set to 'ON' or 'Network ON'. This setting enables the mail notification function while the projector is in standby mode.
M
morgankarenSep 2, 2025
Why is my Epson Monitor not sending email messages?
- I
  ifrazierSep 3, 2025
  If your Epson Monitor cannot send e-mail messages, it might be due to a critical problem causing the projector to momentarily stop working. If the projector cannot be reset even after it has been checked, contact Epson.

Epson PowerLite 1825 Specifications

General

Display Technology	3LCD
Connectivity	HDMI, VGA, USB
Zoom Ratio	1.2x
Projection Size	30" - 300"
Keystone Correction	Vertical ±30°
Outputs	VGA
Wireless Connectivity	Optional