Epson PowerLite 1825 User Manual

Presenting Through a Wireless Network 107
Connecting With Windows Vista
If you have Windows Vista, you can use the Network Projector
function to connect to the projector without installing the EasyMP
software. This provides a quick, easy way to connect wirelessly,
though with limited capabilities. Not all the features available with
EMP NS Connection are possible when connecting using the Vista
network projector function. All performances are enhanced when you
use EMP NS Connection.
Follow these steps:
1. Turn on the projector.
2. Press the
EasyMP button on the remote control. The standby
screen appears.
3. From the Start menu on your computer, select
All Programs,
Accessories, then Connect to a Network Projector. You see
this screen:
note
Use only the Epson
802.11a/b/g wireless module
in the projector. If you see a
message asking you to insert
a LAN or memory card,
check to make sure your
802.11 a/b/g module is
p
roperly inserted (see
p
age 54).

Epson PowerLite 1825 Specifications

General

Brand	Epson
Model	PowerLite 1825
Category	Projector
Language	English