104 Presenting Through a Wireless Network
Using Presenter View
Presenter View allows you to see your PowerPoint notes and controls
on your laptop while projecting only the presentation slides to your
audience. Follow these steps to set up and use Presenter View:
1. Make sure you have at least one EPSON Virtual Display enabled.
If you did not enable Virtual Displays when you installed NS
Connection, select
EPSON Projector from Start > Programs or
All Programs
. Select Add-Remove EPSON Virtual Display,
then check
EPSON Virtual Display 1. If you see a message that
the driver has not passed Windows Logo testing, click
Continue
Anyway
. Then restart your computer.
2. Launch NS Connection as described on page 89.
3. Click
Use multi-display, then click Display properties.
4. On the Display Properties screen in Windows, make sure your
Epson Projector Virtual Display Driver is selected, then check
Extend my Windows desktop onto this monitor and click
OK
.
In the Mac Displays program, select the
Arrangement tab and
uncheck the
Mirror Displays setting to deselect it.
To Next Page
Loading...
Need help?
General