Epson PowerLite 85 - Adjusting the Aspect Ratio; When Connected to Video Equipment

INSTALLATION
HANDBOOK
Remote Control Information
Epson PowerLite 85/825/826W
5
Adjusting the Aspect Ratio
You can use the Aspect button on the remote control to adjust how
an image ts into the display area. Each time you press the button, the
projector changes to the next setting.
When Connected to Video Equipment
If you’re projecting from video equipment such as a DVD player, set
the projector’s
Aspect setting to match that of the player. For
example, if the video player is set to output images at a 16:9 aspect
ratio, set the projector’s
Aspect setting to 16:9 so they match. If the
player outputs images at a 4:3 aspect ratio, select
4:3 (PowerLite
85/825) or
Normal (PowerLite 85/826W).
PowerLite 85/825
4:3 setting 16:9 setting
PowerLite 826W
Normal setting 16:9 setting