Need help?Do you have a question about the Epson PowerLite EBL630U and is the answer not in the manual?
General| Resolution | WUXGA (1920 x 1200) |
|---|---|
| Light Source | Laser |
| Weight | 4.6 kg |
| Connectivity | USB 2.0 Type A, USB 2.0 Type B, RS-232C, Ethernet interface (100 Base-TX / 10 Base-T), Wireless LAN IEEE 802.11a/b/g/n/ac, Wi-Fi Direct, VGA in (2x), VGA out, HDMI in (2x), Composite in, HDBaseT |
| Projection Technology | 3LCD |
| Zoom | 1.6x |
| Throw Ratio | 1.35 - 2.16:1 |
| Lamp Life | 20, 000 hours |
| Keystone Correction | Vertical: ± 30°, Horizontal: ± 30° |
| Zoom Ratio | 1.6:1 |
| Input Terminals | HDMI |
Details the special features of the PowerLite projectors, including projection system and connectivity.
Identifies and illustrates the location of all projector parts and components.
Guides on connecting the projector to various projection sources like computers and video devices.
Provides guidelines for choosing a suitable location for the projector, considering ventilation and screen alignment.
Outlines the different ways a projector can be set up or installed for use.
Explains how projector distance from the screen affects image size and provides calculation tables.
Details the steps and cables needed to connect a computer via VGA for video and audio.
Provides instructions for connecting a computer using an HDMI cable for video and audio.
Explains how to connect an HDMI video source to the projector for optimal image quality.
Explains the menu settings required for multi-projector setups.
Guides users on setting up projector projection through a wired network.
Covers setting up the projector for projection over a wireless network connection.
Allows viewing network information and setting up the projector for network control.
Guides users on selecting wireless network settings on a Windows computer.
Guides users on selecting wireless network settings on a Mac computer.
Lists limitations and restrictions when using the Screen Mirroring feature.
Details how to select and configure Screen Mirroring settings on the projector.
Provides steps to enable and share your projected image to other projectors on the network.
Describes the basic remote control functions accessible via the web interface.
Explains the on-screen display control pad for navigating projector menus via web.
Details the remote and playlist controls available in Content Playback mode via web.
Provides steps to configure the projector for monitoring and control via Crestron Connected.
Explains how to register digital certificates for wireless LAN authentication via web browser.
Step-by-step guide on how to properly power on the projector and its initial status.
Provides instructions on how to safely turn off the projector after use.
Explains how to change the language displayed in the projector's menus.
Details how to set the projector's internal date and time settings.
Explains using H/V-Keystone to correct unevenly rectangular images on the sides.
Details using Quick Corner to correct image shape and size on all sides.
Explains using Arc Correction to adjust curves or arcs on the sides of the image.
Guides on fine-tuning image shape using points on a grid for precise distortion correction.
Provides steps to flip the image top-to-bottom using the A/V Mute button.
Details how to change projection modes via the projector's menu system.
Guides on resizing the displayed image by changing its aspect ratio.
Provides steps to select and change the projector's Color Mode using the remote control.
Lists and describes the available Color Modes for various viewing environments.
Lists important precautions to follow when using the PC Free projection feature.
Details the file types compatible with the projector's PC Free feature.
Provides steps to switch to USB input and start a slideshow.
Explains how to switch to USB input and start projecting movies.
Covers selecting display options for slideshows and movies in PC Free mode.
Details how to enable and activate Content Playback mode on the projector.
Explains how to project playlists containing images and movies.
Covers creating playlists via web browser and saving them to a USB drive.
Guides on temporarily muting video and audio projection using the A/V Mute button.
Explains how to freeze video action in presentations, keeping the current image on screen.
Details how to use E-Zoom buttons for enlarging and navigating parts of the projected image.
Explains different password security options like Power On Protection and Network password.
Provides steps to set a new four-digit password for projector security.
Guides on choosing which password security types to enable for the projector.
Provides methods to unlock the projector's control panel buttons if they have been locked.
Lists supported and unsupported input source combinations for split screen projection.
Details operations and image restrictions that apply during split screen projection.
Provides an overview of steps for adjusting multiple projector images for seamless display.
Explains assigning IDs to projectors and remote for multi-projector control.
Details how to assign a unique ID to each projector for remote control management.
Guides on setting the remote control's ID to match a specific projector for exclusive operation.
Lets you save the current image quality settings to memory.
Loads a saved image quality setting memory.
Renames a saved image quality setting memory.
Deletes a saved image quality setting memory.
Provides steps to select projector commands and schedule them.
Explains how to view scheduled events on the calendar.
Details how to save projector settings to a USB flash drive for transfer.
Explains how to save projector settings to a computer.
Provides steps to transfer saved projector settings from a USB flash drive.
Details how to transfer projector settings from a computer.
Explains how to navigate and adjust settings using the projector's on-screen menus.
Details image quality adjustments like Color Mode and Brightness in the Image menu.
Covers customizing settings for input sources, including Source, Resolution, and Aspect.
Explains setting the projector for installation in a fixed location.
Guides on displaying a test pattern for image focusing and shape correction.
Details how to select projection modes for correct image orientation.
Covers image shape adjustments like H/V-Keystone, Quick Corner, and Arc Correction.
Explains how to adjust the projected image size using Digital Zoom.
Details how to adjust the projected image size using the E-Zoom feature.
Covers adjusting the projected image position using the Image Shift feature.
Explains settings for limiting remote control signal reception.
Details how to set the aspect ratio to fit the projected image.
Covers shifting the image position on the screen for alignment.
Selects the display for when no input signal is detected.
Controls whether a logo is displayed when the projector starts up.
Controls whether the Home screen displays automatically when no input signal is detected.
Displays detected input sources in order on the Home screen.
Controls whether projector status and error messages are displayed.
Rotates the menu display by 90 degrees for different installation orientations.
Sets the color theme for the Home screen and projector menu system.
Displays a message when a clog in the air filter is detected.
Adjusts Split Screen feature, including audio output and alignment.
Enables automatic input source selection; unavailable in Content Playback or Quick Startup.
Controls the constant brightness of the projector's light source.
Controls whether the projector automatically turns on when plugged in.
Selects automatic projector turn-on when an input signal is connected.
Automatically turns off the projector after a period of inactivity.
Enables network monitoring/control when projector is in standby mode.
Enables playback of playlists created in Epson Projector Content Manager software.
Adds color and shape effects to projected images.
Assigns a menu option to the User button for one-touch access.
Creates a screen to identify the projector and enhance security.
Controls projector button locking to secure the device.
Adjusts color tone balance for the whole screen or specific areas.
Selects options to perform light source calibration for color balance and brightness.
Adjusts the projector's date, time, daylight saving, and internet time settings.
Schedules projector events to occur automatically.
Provides basic maintenance tasks like cleaning the lens, air filter, and vents.
Guides on periodically cleaning the projector's lens to remove dust and smudges.
Details how to clean the projector case using soft cloths, with precautions.
Emphasizes regular air filter maintenance to prevent overheating.
Provides instructions on cleaning the projector's air filter when it gets dusty.
Details the process of updating firmware via a USB storage device.
Provides instructions for updating firmware using a computer connected via USB cable.
Provides basic troubleshooting steps like power cycling and checking status lights.
Explains how projector lights indicate status and potential problems, with solutions.
Guides on monitoring projector status and viewing error information through the menu.
Categorizes status display screens to view projector information and operation status.
Provides solutions for issues related to projected images or sound output.
Offers troubleshooting steps when no image is displayed on the screen.
Provides solutions for when the projector displays a 'No Signal' message.
Guides on setting up a laptop to display on an external monitor.
Explains how to set up a Mac laptop for mirrored display.
Troubleshooting steps if no image appears on a connected external monitor.
Offers solutions when the projector displays a 'Not Supported' message.
Provides solutions for issues where only a partial computer image is displayed.
Offers solutions for projected images that are not evenly rectangular.
Provides troubleshooting steps for images with electronic interference or static.
Offers solutions for projected images that appear fuzzy or blurry.
Provides solutions for images that are too dark/light or have incorrect colors.
Offers solutions if an afterimage persists on the projected image.
Provides troubleshooting steps for issues related to sound or volume.
Offers solutions for problems encountered when using the PC Free projection feature.
Guides on troubleshooting issues with projector or remote control operation.
Provides solutions for issues where the projector won't turn on or shuts off unexpectedly.
Offers troubleshooting steps when the remote control is not responding to commands.
Provides solutions for issues related to entering or remembering projector passwords.
Offers guidance if a message indicates the clock backup battery is low.
Provides solutions for issues encountered when using the projector on a network.
Offers troubleshooting steps when wireless authentication fails.
Provides solutions for inability to access the projector via a web browser.
Offers troubleshooting steps if network alert emails are not received.
Provides solutions for issues connecting to the projector via Screen Mirroring.
Offers troubleshooting steps for static or noise during network projection.
Provides solutions for static or noise during Screen Mirroring.
Offers troubleshooting steps for issues with playing back playlists in Content Playback mode.
Provides solutions for issues controlling HDMI devices using the HDMI Link feature.
Provides general specifications including display type, resolution, lens, and color reproduction.
Details specifications for the projector's laser light source, including type and life.
Lists specifications for the remote control, including reception range and battery type.
Provides the physical dimensions of the projector (height, width, depth).
Lists electrical specifications like rated frequency, power supply, and power consumption.
Details operating and storage temperature and humidity ranges for the projector.
Lists safety and approval specifications for the projector in the US and Canada.
Lists compatible refresh rates and resolutions for various video display formats.
Provides information on Epson's recycling program for end-of-life products.
Contains critical safety warnings regarding laser use, cleaning, and handling.
Details safety instructions specific to the projector's Class 1 laser product classification.
Follows safety instructions for setup and use, including lens warnings and mounting advice.
Outlines restrictions on using the product for high reliability/safety applications.
Defines safety symbols labeled on the equipment.
Details FCC compliance for the device and measures to correct interference.
Encourages users to be responsible and respectful of copyright laws.
Provides copyright information for Epson America, Inc.
To Next Page