Setting Options Description
Deinterlacing Off Sets whether to convert
interlaced-to-progressive signals
Video
for certain video image types
Film/Auto
Off: for fast-moving video images
Video: for most video images
Film/Auto: for movies, computer
graphics, and animation
Motion Detection 1 to 5 Selects how the image is
converted to a progressive signal
(Adjust this setting if you
experience problems with still
image quality or flickering video.
Select a lower setting for still
images or a higher setting for
fast-moving video content.)
Frame Interpolation Off Smooths fast moving video by
comparing consecutive frames
(PowerLite Pro Cinema 6030UB) Low
and inserting an intermediate
Normal
frame between them
High
Super-resolution 0 to 5 Sharpens blurred images when
viewing 3D content
Auto Setup On Automatically optimizes
computer image quality
Off
69
To Next Page
Loading...
