151
Setting Options Description
Light Optimizer On
Off
When Power Consumption is
set to Normal and both Auto Iris
and Multi Projection are turned
off, the lamp brightness is
adjusted based on the projected
image; you can set this option for
each color mode
Sleep Mode On
Off
Automatically places the
projector in standby mode after
an interval of inactivity
Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode
Lens Cover Timer On
Off
Automatically turns off the
projector after 30 minutes if the
lens cover is closed
A/V Mute Timer On
Off
Automatically turns off the
projector after 30 minutes if
A/V Mute is enabled
Standby Mode Communication On
Communication Off
Enable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
ECO Display On
Off
Displays a leaf icon in the bottom
left corner of the projected screen
to indicate the power-saving
status when the lamp brightness
changes
Note: The Power Consumption setting is disabled if you turn on the Multi-Projection setting in the
Extended menu.
To Next Page
Loading...
Need help?
General