EasyManuals Logo

Epson Powerlite User Manual

Epson Powerlite
270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
76
2. Connect the power cord to the projector's power inlet.
3. Plug the power cord into an electrical outlet.
Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.
The projector's On/Standby light turns blue. This indicates that the projector is receiving power.
4. Press the power button on the projector or the remote control to turn on the projector.
The projector beeps and the Status light flashes blue as the projector warms up. Once the projector
is warmed up, the Status light stops flashing and turns blue.
Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is
especially dangerous for children.
If you do not see a projected image right away, try the following:
Verify the lens cover is open all the way.
Turn on the connected computer or video device.
Insert a DVD or other video media and press the play button, if necessary.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson Powerlite and is the answer not in the manual?

Epson Powerlite Specifications

General IconGeneral
BrandEpson
ModelPowerlite
CategoryProjector
LanguageEnglish

Related product manuals