10
Notes on Handling and Storage
Be sure to observe the following precautions to avoid malfunctions, operating
errors or damage to the projector.
Notes on Handling and Storage
• Do not use or store the projector in places where it might be subjected to high
and low extremes of temperature. Furthermore, avoid places where the
temperature may change suddenly.
• Be sure to observe the operating temperatures and storage temperatures
giv
en in the User's Guide when using and storing the projector.
• Do not set up the projector in places where it might be subjected to vibration
or shoc
k.
• Do not set up the projector near high-voltage electrical wires or sources of
magnetic fields
.
These may interfere with correct operation.
• Do not operate the projector under any of the following conditions. If this is not
observed, problems with operation or accidents may result.
• Do not tilt the projector forwards o
r backwards at an angle that is greater than
specified in the User's Guide. Doing so may damage the projector or cause
an accident.
• Do not touch the lens with bare hands.
• Always attach the lens cover to the lens when not using the projector, to
pre
vent the lens from becoming dirty or damaged.
• Remove the batteries from the remote control before storage.
If the batteries are left in the remote control for long periods, they may leak.
• Do not use or store the projector in places where smoke from oil or cigarettes
may be present, as it can adversely affect the quality of the projected images.
• Contact your dealer to clean the interior of the projector. If the interior of the
projector has
not been cleaned for a long time, dust may build up, which could
cause fire or electric shock.
While the projector is
standing on its side.
While the projector is
tilted one side.
To Next Page
Loading...
Need help?
General