5
Do not place any containers of liquid on top of the unit.
Spilling liquid of any kind into the projector may result in fire or
electric shock.
Do not look into the lens when the projector is on. The bright light
can damage your eyes.
Do not insert or drop metal, flammable, or foreign objects into the
projec
tor's vents or openings nor leave them nearby.
Doing so may result in fire, electric shock, or burns.
A mercury lamp with high internal pressure is used as the
projector's light source. Be sure to observe the instructions below.
If the following points are not observed, injury or poisoning may
result.
• Do not disassemble or damage the lamp or subject it to any
impacts.
• The gases inside mercury lamps contain mercury vapor. If the lamp
breaks, v
entilate the room to prevent the gases that are released
from being inhaled or coming into contact with the eyes or mouth.
• Do not bring your face close to the projector while
it is in use.
• Particular care should be taken when the projector is installed to a
ceiling, as small pieces of glass may f
all down when the lamp cover
is removed. When cleaning the projector or replacing the lamp
yourself, be very careful not to allow such pieces of glass to get into
the eyes or mouth.
If the lamp breaks and gases or fragments of broken glass from the
lam
p are inhaled or get into the eyes or mouth, or if any other ill
effects are noticed, immediately seek medical advice. In addition,
consult your local regulations regarding proper disposal and do not
place in the trash.
Warning
Do not
wet
Do not do
Do not do
Instructions
To Next Page
Loading...
Need help?
General