C
Hook a finger into the indentation on top of
slider and pull it straight out.
c
Important:
Do not tilt the slider. Dropping the chip unit
may damage it.
D
Remove the chip unit from the slider.
E
Install the chip unit that comes with the new
ink pack.
During installation, check to ensure that the
labels on the slider and the chip unit are the
same color.
F
Hold the slider level horizontally and insert it.
Close the side cover.
c
Important:
Do not push the slider in with excessive force.
This can cause damage.
SC-F6300 Series Operator's Guide
Maintenance
23
To Next Page
Loading...
