Caution:
❏ During maintenance, wear protective clothing,
including protective eyewear, gloves, and a
mask.
Should ink, waste ink, or ink cleaner come
into contact with your skin or enter your eyes
or mouth, take the following actions:
❏ If fluid adheres to your skin, wash it off
using large volumes of soapy water. If you
notice any reaction developing in the
affected area, consult with a qualified
physician immediately.
❏ If ink gets into your eyes, wash them out
immediately with water. Failure to
observe this precaution could result in
bloodshot eyes or mild inflammation.
Consult with a qualified physician if any
other problems should develop.
❏ If fluid enters your mouth, consult with a
physician as soon as possible.
❏ If swallowed, do not induce vomiting.
Consult with a physician as soon as
possible. If vomiting is induced, vomited
material may enter the windpipe, which is
dangerous.
❏ Store ink supply units, waste ink, and ink
cleaner in a location out of reach of children.
❏ Remove the media from the printer before
proceeding.
❏ Never touch the belts, circuit boards, or any parts
that do not require cleaning. Failure to observe
this precaution could result in malfunction or
reduced print quality.
❏ Do not use anything other than the supplied or
consumable cleaning stick. Other types of stick
that produce lint will damage the print head.
❏ Always use fresh cleaning sticks. Re-using sticks
can make stains even harder to remove.
❏ Do not touch the tips of the cleaning sticks. Oil
from your hands could damage the print head.
❏ Do not use anything other than the ink cleaner
specified to clean the capping station or the wiper.
Using anything else could result in malfunction or
reduced print quality.
❏ Touch a metallic object before starting work to
discharge any static electricity.
SC-F6400 Series/SC-F6400H Series User's Guide
Maintenance
55
To Next Page
Loading...
Need help?
General