❏ Blueprint Paper
To select a paper type that is not displayed on
the screen, touch Others.
Select a category and select the target paper
type. When a paper type is confirmed, the
screen returns to the one in step 1.
Note:
If you scroll downward in the category selection
screen, Custom Paper appears. To select custom
paper that has already been registered, touch
Custom Paper.
D
Touch Paper Size.
If you will not change the paper size, touch OK.
For Auto Sheet Feeder
For Cut Sheet(1 sheet)
Select a category and select the target paper size.
Note:
Setting non-standard size
For a non-standard size, touch User-Defined at
the end of the list and then enter the paper width
and length.
On the keypad screen for entering a numeric
value, enter numbers that include a number of
the first decimal place. For example, if you want
to enter 5 m, touch [5] and [0].
E
When the screen of step 1 is redisplayed, touch
OK.
You can start printing once Ready appears on
the screen.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Loading and Setting the Paper
44
To Next Page
Loading...
