For Roll Paper Width and Media Type, the
settings configured in the control panel of the
printer are applied automatically.
Note:
If you load or change paper after opening the
printer driver screen, click the Acquire Info
button to update the settings.
G
Select Select Target in Print Quality.
Choose an option according to the type of
document and how it will be used.
To set the color correction method or color
balance in detail to match your preferences,
clear the Simple Settings check box. See the
following for more details.
U “Correct color and print” on page 68
H
Check that the Print Preview check box is
selected and then click Print.
If a preview is not necessary, clear the check
box and then click Print.
Note:
❏ In the print preview, you can check and
change the print settings while viewing the
image to be actually printed. We recommend
to check with the preview when printing on
roll paper or large-sized paper.
I
Check the print settings in the print preview
screen, and if there is no problem, click Print
to start printing.
The icons and menus at the top of the preview
screen allow you to change the image display
settings. You can change the print settings
using the menus on the right side. See the help
for more details.
SC-T3100x Series User's Guide
Printing with the Printer Driver from Your Computer
54
To Next Page
Loading...
Need help?
General