5
8. Windows 98 detects your printer and displays the following screen. Click
Next
to install
your printer driver.
9. At the next screen, select
Search for the best driver for your device
and click
Next
.
10. Select
Specify a location
and, if necessary, type
D
:\DRIVERS\WIN98
(where
D
is your
CD-ROM drive letter). Then click
Next
.
11. Follow the on-screen instructions to install your printer driver and Status Monitor 2, then
restart your system.
To verify that your USB software installed properly, check the Device Manager. Click
Start
,
point to
Settings
, and click
Control Panel
. Then double-click
System
and click the
Device Manager
tab. You should see the device
EPSON USB Printer Devices
listed. Click
the
+
next to the device; you should see
EPSON USB Printer (EPUSB1:)
listed too.
If the printer doesn’t work correctly, uninstall the printer software as described in the Printer
Basics book. Also uninstall the EPSON USB Printer Device software the same way. Then
reinstall the USB device and printer software as described in this guide. If you still have
problems, contact your EPSON dealer or EPSON technical support as described in the
Printer Basics book.
You see your printer
model name here
Click
Specify a location
, type
the path, and click
Next
solusb1.fm Page 5 Monday, October 12, 1998 12:06 PM
To Next Page
Loading...
Need help?
General