To Next Page
J
jamescaseyAug 19, 2025
Why does my Epson R200 - Stylus Photo Color Inkjet Printer feed more than one paper?
- EEmily PhillipsAug 19, 2025
The Epson printer feeds more than one sheet of paper because the Roller, Retard Assy. is working incorrectly.
Why does my Epson R200 - Stylus Photo Color Inkjet Printer feed more than one paper?
The Epson printer feeds more than one sheet of paper because the Roller, Retard Assy. is working incorrectly.
What to do if my Epson R200 - Stylus Photo Color Inkjet Printer says 'Ink Out Error'?
The Epson printer displays the 'Ink Out Error' when the ink consumption reaches 100% or the ink cartridge is faulty. Check if the ink cartridge is empty or damaged and replace it if necessary.
Why does my Epson Printer say 'Paper Jam Error'?
The Epson printer shows the 'Paper Jam Error' because the end of the paper cannot be correctly detected by the PE Sensor during paper loading, or the rear of the CD/DVD cannot be correctly detected by the Star Wheel/CDR Sensor when loading a CD/DVD.
How to fix 'No Ink Cartridge' error on Epson Printer?
The Epson printer displays the 'No Ink Cartridge' error when the ink cartridge is either not installed in the carriage unit or is defective. Ensure the ink cartridge is properly installed and not defective.
Why does my Epson R200 - Stylus Photo Color Inkjet Printer show a 'Paper Out Error'?
The Epson printer displays the 'Paper Out Error' because the top of the paper cannot be detected by the PE Sensor during paper loading.
Why does my Epson R200 - Stylus Photo Color Inkjet say 'Ink Low Condition'?
The Epson printer shows the 'Ink Low Condition' message when the ink consumption reaches approximately 90%.
What causes 'Paper Jam Error (Carriage Unit strikes)' on Epson R200 - Stylus Photo Color Inkjet Printer?
The Epson printer displays the 'Paper Jam Error (Carriage Unit strikes)' message because the PE Sensor is not set correctly or the Torsion Spring is unfastened. This occurs when the Carriage Unit strikes the Lever, Change, which is leaning forward when turning on the power.
Why does my Epson R200 - Stylus Photo Color Inkjet eject paper after detecting it?
The Epson printer displays the 'Paper Jam Error (Leading edge detected but ejected)' message because, while feeding paper, the leading edge of the paper is detected properly, but the paper is ejected without being set at the print start position. This is due to the Roller, Retard Assy. not operating properly.
What does 'Maintenance Request' mean on my Epson Printer?
The Epson printer displays the 'Maintenance Request' error when the value of the Waste Ink Pad Counter reaches its limit.
Why does my Epson R200 - Stylus Photo Color Inkjet Printer show a 'CD/DVD Guide Error'?
The Epson printer displays 'CD/DVD Guide Error' because paper is present in 'ASF Assy.', and 'CDR Guide Assy.' is open while receiving print data.
Signals a precaution for fatal personal injury. Exercise great caution.
Signals a precaution for damage to equipment. Exercise great caution.
Describes the manual's structure, including chapters and appendix.
Explains various symbols used for warnings and notes within the manual.
Describes troubleshooting levels, motor coil resistance, and sensor specifications.
Explains error conditions based on LED/LCD indications and Status Monitor 3 messages.
Identifies troubles by checking LED/LCD indicators and error messages on Status Monitor 3.
Introduces disassembly procedures and outlines general warnings and precautions.
Lists specified tools required to avoid damaging the printer during repair.
Provides a checklist for verifying work completion after printer repair.
Provides critical cautions for reassembling printer mechanisms to ensure quality.
Illustrates the sequential order for disassembling various printer units.
Details the removal procedures for the paper support, housing, and stacker assemblies.
Explains the process for removing the printer's main frame, panel assembly, and panel board.
Provides step-by-step instructions for removing the Automatic Sheet Feeder (ASF) unit.
Details the procedure for safely removing the Carriage (CR) Motor.
Describes the steps and precautions for removing the Print Head assembly.
Explains how to remove porous pads and the front paper guide.
Details the procedure and necessary disconnections for removing the main logic board.
Describes how to remove the holder and shaft unit, including connector disconnections.
Explains the steps for removing the Auto Paper Guide (APG) unit.
Details the procedure for removing the upper paper guide, including spring and hook releases.
Describes the multi-step procedure for removing the carriage unit.
Details removing the main printer mechanism and the lower housing unit.
Explains the procedure for removing the power supply unit and associated boards.
Details the removal of the CD/DVD guide assembly, including tape and connector releases.
Describes the complex procedure for removing the ink system unit, including gears and springs.
Details removing the front paper guide and the Roller EJ assembly.
Explains the procedure for removing the Paper Feed (PF) motor, including belt and spring removal.
Introduces adjustments required after disassembly/reassembly of printer components.
Details the adjustment items and their priorities based on replaced parts.
Explains procedures for various adjustments performed using the exclusive servicing program.
Covers specific adjustments that are performed outside the main adjustment program.
Provides information for maintaining the printer and details cleaning procedures for key components.
Explains actions to clear print errors and maintenance requests using printer functions.
Details lubrication points, types, amounts, and remarks for various printer components.
Notes that an exploded diagram is available in the separate Parts List document.
Lists the specific pages where electrical circuit diagrams for different boards are located.
General